Selecting a correctly sized helmet is an essential component of motorcycle safety. Yet, many people do not know how to select the helmet that is best suited to the size of their heads. In fact, most people tend to select helmets that are too large and will not provide them with much protection if they are involved in an accident.  Sizing a motorcycle helmet is very easy and it won’t take you very long to do,  plus it can save your life.

Things to Look for When Sizing Your Motorcycle Helmet

The most important rule to remember when selecting the correctly sized motorcycle helmet is that it should fit snugly on your head. At the same time, it shouldn’t be so tight that it feels uncomfortable and cannot be worn for longer than 10 or 15 minutes.

In order to accurately determine the helmet size that is right for you, you should measure your head with a cloth measuring tape. Be certain to measure about ½ inch to an inch above your eyebrow, just over your ears and at a point in the back of your head that results in the largest possible measurement.  Measure it a couple of times so you can get an average and consistent size for your head. You can measure in inches or centimeters.

Whether you are able to measure the circumference of your head or not, it is a good idea to try on a few helmets in order to determine the size that is best suited for you. If a helmet is the proper size, it should provide uniform pressure around your head and on your cheeks. The pressure the helmet places on your cheeks should be enough to make your cheeks squeeze in slightly so you are almost biting the inside of your cheek.

Things to Avoid When Selecting the Properly Sized Motorcycle Helmet

When trying on helmets, there are a few things to look for that will indicate that the helmet is too large. For example, if the helmet slides on easily, keep in mind that this means it will come off easily during an impact as well and means it won’t provide much protection if you are in an accident. In addition, you should not be able to easily twist the helmet from side to side. If you grab the chin of the helmet and move it from side to side, your skin should move along with the helmet.

Another area to check is where the helmet meets your forehead. If you can fit your finger in this area, the helmet is too loose and may actually get pulled off your head by the wind as you ride. Similarly, you should not be able to pull the front of the helmet down on your face so it covers your eyes or so the chin piece is below your chin.

If the motorcycle helmet feels too tight on your head, your head does not touch the top of the helmet, you can’t pull the helmet down completely over your ears or if it’s painful in any way then you should get the next size larger.

Taking your time to find a helmet size that is the right one for you is an essential part of motorcycle safety. Even if you plan to purchase your helmet online, it is a good idea to try on helmets at a store if possible in order to get a general idea about which size to purchase.  Try on different styles of helmets since different name brands may fit the head differently.  While measuring your head is the starting point for the sizing procedure,  remember that due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.  Helmets also vary in shape.  Some are oval while others are more round.  This will make a difference!

First Prize: Choice of one of the above pictured ZANheadgear™ Streetdannas® and a $10 Gift Certificate from MBG Ltd. Motorcycle Gear

Second Prize: Choice of one of the above pictured ZANheadgear™ Streetdannas® and a $5 Gift Certificate from MBG Ltd. Motorcycle Gear

Third Prize: Choice of one of the above pictured ZANheadgear™ Streetdannas®

You can see the Streetdannas® by visiting our website: www.mbgltd.com

TO ENTER:

* Be a MBG Ltd Facebook Fan

* Braggin’ time!! Post a picture or video of you, your motorcycle, etc. Anything motorcycle related on MBG’s Fan page! Pictures/Videos MUST be yours. No ‘borrowing’ from the internet!

* Pictures/Videos MUST be appropriate content for public viewing (no nekkid pictures!)

* Every picture/video you post counts as a separate entry into the drawing.

* This giveaway is for our Facebook Fans ONLY (but you can tell your friends and family how to join in. The more the merrier!)

* Have fun showing off!!

———————————————————————————

The Fine Print: Must be 18 or older to enter. Open to U.S. Residents only. Void where prohibited. We reserve the right to remove any pictures or videos we feel are inappropriate for public viewing. This promotion is in no way sponsored, endorsed or administered by, or associated with, Facebook, Twitter or Zanheadgear. Contest begins December 10, 2009, and ends at 11:59:59 p.m. (EST) on December 31, 2009. Winner will be notified via email within 24 hours and must respond within 48 hours to maintain winner status. Failure to provide a valid email and/or shipping address will result in forfeiture of prize.

FREE SHIPPING on orders over $50.00 (not including shipping)

Monday, December 7th – Friday, December 18th

Only good for customers within the 48 US Contiguous States & DC (AK, HI, PR see 10% off coupon)

Unlimited use – share with friends and family!

——————————————————————————
FOR our ALASKA, HAWAII and PUERTO RICO fans:

COUPON CODE: TENOFF-HIAKPR

10% OFF on orders over $50.00 (not including shipping)

Monday, December 7th – Friday, December 18th

Only good for customers within Alaska, Hawaii and Puerto Rico.

Unlimited use – share with friends and family!

• Become a MBG Facebook Fan : 1 entry
• Follow MBG on Twitter http://twitter.com/MBGLtd: 2 extra entries
• Tweet this giveaway (be sure to include @MBGLtd): 3 extra entries
• Make a purchase at our website www.mbgltd.com from Nov. 28th – Dec. 8th: 4 extra entries
• Blog about this giveaway and leave a comment either on the MBG Facebook wall or a comment here with your Blog post url: 5 extra entries.

Gear Up for the Holidays! – Coupon Code: GEARUP4HOLIDAYS

www.youtube.com/watch?v=vBW0GVtqwqM

The Seniors (Class of 2010 Woo Hoo!) went with a Motorcycle theme and took the top award of Best Float. The “Rebel Hill Road Kill” float was escorted down the parade route by a group of local bikers which put the perfect finishing touch on their entry. Congratulations Class of 2010!! Best Homecoming float I’ve seen in a long time. 

For full size images click the little square on the right of the slideshow navigation bar.

The Juniors took Second Place with their “Ice the Red Raiders” entry and the Sophmore Float came in Third with their “Roast the Raiders” theme. 

Unfortunately, we don’t have pictures of the Freshman Float because as  my daughter, the photographer, put it “the camera ate them”.

Rossmeyer, 66, of Ormond Beach, was riding with several motorcyclists when they pulled out to pass a pickup. Rossmeyer was the last in line and was killed when the truck strayed into his lane, hitting his motorcycle.

Our thoughts and prayers go out to his family.

http://www.news-journalonline.com/NewsJournalOnline/breakingnews/bruce073009.htm

http://www.wesh.com/news/20229340/detail.html

You will need to set aside a substantial sum to ensure you have all the necessary equipment you will need to make riding a motorcycle a safe endeavor. Sacrificing price for good riding gear may cost you more in medical costs in the long run.

The first thing you will need is a good, sturdy helmet. This will protect your head and face if you should fall off your motorcycle for any reason. A fall off a motorcycle going at high speeds can prove fatal if you are not wearing a proper helmet. There are many places that do not require riders to wear helmets, but it is a good idea to wear one at all times for your own safety and continued well being.

You are sure to have noticed people involved in the sport of motorcycle riding wearing an abundance of leather. Those who are not familiar with the sport tend to think that riders are trying to project an “outlaw” image. The clothing that is worn when you are riding should be comfortable, safe, and for your protection. Leather is tough as well as durable and can offer you the maximum protection should you have a riding mishap.

Wearing gloves is also a good idea. When you fall from your motorcycle, you are likely to use your hands to break your fall. If you are wearing a good pair of motorcycle gloves, you can prevent road rash on your hands.

A full-length pair of motorcycle boots that are also hard is also a must for those who intend to do a lot of riding. Sneakers are not recommended for motorcycle riding. It is best to have boots to limit any leg or foot injuries you may suffer from a fall. They also give you extra inch or more, so when you are stopped, your feet can more readily reach the ground.

Wearing a leather jacket that has vents is a good idea. In the summer, you can open the vents to allow the air to circulate to keep you from becoming overheated. If you ride in the winter too, you can easily add a lining to add more protection from the cold. If you should ever have the misfortune to go down while riding your motorcycle, you will be thankful you had the foresight to be wearing leather.

You can purchase any or all of these items if you shop online. Shopping online is simple and you can view several prices for any items you wish to purchase to ensure you are paying the lowest prices for the best quality. It is always best to protect yourself with the proper riding apparel when you go out on a motorcycle. It can be dangerous, but you can do all that is possible to protect yourself from serious injury by wearing the proper clothing.

Article Source: http://www.ArticleStreet.com/

1) If you own a helmet with a removable interior lining, it can be removed and washed either by hand in cool water using a neutral cleaning agent or in a washing net in the washing machine on the delicate cycle.  This can be done while you are cleaning the outside of the helmet.  Fixed padding can be wiped with a damp cloth containing a neutral cleaning agent.  After cleaning, let all pieces of the lining dry thoroughly out of direct sunlight before installing them back into the helmet.  This is very important in order to prevent unpleasant odors from developing.

2) Clean the exterior of the helmet with warm water and soap. If the helmet is extremely dirty or if there are dried bugs on it, place a wet towel on it for a few minutes to soften the dirt. This will help soften the caked dirt and lessen the chances of  scratching the finish.

Never use any solvents or abrasive cleaners! This can ruin the helmet’s finish.

Most helmets have a thin protective coating to give them a distinctive shine, but with frequent cleaning, this coating may eventually rub off.   Automotive wax can be applied to protect the paint finish, but other harsh chemicals should be avoided to keep from damaging the high-gloss finish.  Do not apply the polish unless the helmet’s exterior is thoroughly clean.

3)  Plastic Parts (including the shield) should not be cleaned with anything containing solvents.  Acid or alkaline based corrosive cleaning agents, such as window cleaners containing ammonia, should also be avoided.  Just like the preliminary cleaning of the helmet’s exterior, use a wet towel to first soften any dirt and then wash with mild soap and lukewarm water.  

The shield should only be cleaned using a soft cloth or a cotton swab with cool water.  Even if the exterior of the helmet’s face shield is coated with an anti-scratch film, it can be damaged if caked dirt, grime, and bugs are not softened and wiped first. 

If the interior of your face shield has been treated with a no-fog shield coat,  do not rub as it might cause premature wear and scratching of this coat. Instead, pat the interior with a towel until it is dry.